LIPO - 7.4V BATTERY - 1300 MAH - 25C - MINI-TYPE
Click image for gallery
Technical specifications
Nominal voltage: 7.4V (2S – two cells in series)
Capacity: 1300mAh
Continuous discharge rate: 25C
Connector: Mini Tamiya (Mini‑Type)
Estimated weight: 63.8g
Dimensions: 101 x 22 x 7 mm
Associated hazards and risks
Deep discharge: below 3.0V/cell → irreversible damage to the battery.
Overcharge: above 4.2V/cell → risk of swelling, fire or explosion.
Excessive current: exceeding the 25C limit → overheating, risk of fire.
Knocks or punctures: can lead to violent chemical reactions and ignition.
Extreme temperatures: >60°C → risk of explosion; <0°C → reduced performance and risk of charging.
Unattended charging: may cause fires; it is recommended to charge under supervision and in a fireproof bag.
Unsafe storage: completely discharged or connected to the replica can lead to damage; ideally ~3.8V/cell, in a cool place and away from fire.
Safety recommendations
Use dedicated Li-Po chargers, with balancing.
Disconnect the battery from the replica immediately after use.
Check and maintain the appropriate charge level for storage (~3.8V/cell).
Store the battery in a cool place, away from short circuits and fire. Ideally, in a fireproof bag.
Do not use or charge damaged, swollen or deformed batteries.
Technical | |
Amperage (mAh) | 1300 |
Voltage (V) | 7.4 |