LI-PO - BATTERY 7.4V - 1300MAH - 25C

Specifications

Nominal voltage: 7.4 V (2S – two cells in series)

Capacity: 1300 mAh

Continuous discharge rate: 25 C

Peak discharge rate (burst): approx. 39 A

Mini-Type Stick – compact, ideal for replicas with limited space (e.g. buffer tube)

Connector: Mini-Tamiya

Estimated dimensions: 126 × 20.5 × 13 mm

Estimated weight: ~63.8 g

Associated hazards and risks

Deep discharge (< 3.0 V/cell): may cause irreversible damage and inability to recharge.

Overcharge (> 4.2 V/cell): risk of swelling, fire or explosion.

Excessive discharge current (above 25 C): may lead to overheating and battery failure.

Perforations, physical deformations or mechanical impact: can trigger violent chemical reactions and fire.

Exposure to extreme temperatures: above 60 °C can cause explosion, and below 0 °C reduces performance and risks internal damage.

Unattended charging: high risk of fire; recommended to use a fireproof Li-Po bag and monitor the process.

Improper storage: connecting to the replica or completely discharging can degrade the battery; ideally store it at ~3.8 V/cell, in a cool place and away from fire.

Safety recommendations

Use only Li-Po chargers with balancing.

Disconnect the battery from the replica immediately after use to prevent parasitic consumption.

Store it at ~3.8 V/cell, in a fireproof bag, in a cool place and away from fire.

Do not use damaged, swollen or deformed batteries.