LI-PO - AEP BATTERY - 7.4V - 600 MAH

Specifications

Nominal Voltage: 7.4V (2S – two cells in series)

Capacity: 600mAh

Continuous Discharge Rate: 20C

Stick Type – ideal for AEP replicas with limited space (e.g. G18, Hi-Capa, MP7, Scorpion Vz61)

Estimated Dimensions: approx. 13 × 16.5 × 75 mm

Estimated Weight: 33 g

Cell Type: Li‑Po (Lithium-Polymer)

Recommended Use: AEP replicas with moderate power requirements

Associated Hazards and Risks

Deep Discharge (<~3.0V/cell): may lead to irreversible damage and inability to charge

Overcharge (>4.2V/cell): risk of swelling, fire or explosion

Excessive Current Discharge (above 20C): may cause overheating and damage

Knocks, punctures or mechanical shocks: can trigger violent chemical reactions and fire

Extreme temperatures: above 60°C – risk of explosion; below 0°C – reduced performance and risk of damage

Unattended charging: there is a risk of fire; it is recommended to charge under supervision and in a fireproof bag

Improper storage: if left connected to the replica or completely discharged, damage increases; ideal: store at ~3.8V/cell, in a cool and safe place

Safety recommendations

Charging: use dedicated Li-Po chargers with balancing

Disconnecting: disconnect the battery from the replica immediately after use

Storage: keep the battery at ~3.8V/cell, in a fireproof bag, in a cool place, away from fire

Checking: do not use damaged, deformed or swollen batteries – these can pose a major danger