EVOLUTION SOFTAIR LI-PO ULTRA POWER BATTERY - 7.4V - 2200MAH - 20C - 40C PEAK
Technical specifications
Nominal voltage: 7.4V (2S – two cells in series)
Capacity: 2200mAh
Continuous discharge rate: 20C
Peak discharge rate: 40C
Stick Type – standard, compatible with most medium-sized AEG replicas
Connector: Tamiya Mini
Estimated weight: 90g
Dimensions: 102 x 33 x 15 mm
Associated hazards and risks
Deep discharge: below 3.0V/cell → irreversible damage to the battery.
Overcharge: above 4.2V/cell → risk of swelling, fire or explosion.
Excessive current: exceeding the limit of 20C continuous or 40C peak → overheating, risk of fire.
Impacts or punctures: can lead to violent chemical reactions and ignition.
Extreme temperatures: >60°C → risk of explosion; <0°C → reduced performance and risk when charging.
Unattended charging: can cause fires; it is recommended to charge under supervision and in a fireproof bag.
Unsafe storage: completely discharged or connected to the replica can lead to damage; ideally ~3.8V/cell, in a cool place and away from fire.
Safety recommendations
Use dedicated Li-Po chargers, with balancing.
Disconnect the battery from the replica immediately after use.
Check and maintain the appropriate charge level for storage (~3.8V/cell).
Store the battery in a cool place, away from short circuits and fire. Ideally, in a fireproof bag.
Do not use or charge damaged, swollen or deformed batteries.
| Technical | |
| Amperage (mAh) | 2200 |
| Voltage (V) | 7.4 |
-125x125.jpg)




-125x125.jpg)



-125x125.png)



























-125x125.jpg)

-125x125.jpg)







