EVOLUTION SOFTAIR LI-PO BATTERY ULTRA POWER - 7.4V - 2000MAH - 20C - 40C PEAK
Technical specifications
Nominal voltage: 7.4V (2S – two cells in series)
Capacity: 2000mAh
Continuous discharge rate: 20C (40A)
Peak discharge rate: 40C (80A)
Type: Long stick – ideal for replicas with generous space (ex: M4 with long buffer tube)
Connector: Deans
Estimated weight: ~150g
Dimensions: 126x21x10.2mm
Associated hazards and risks
Deep discharge: below 3.0V/cell → irreversible damage to the battery
Overcharge: above 4.2V/cell → risk of swelling, fire or explosion
Excessive current: exceeding the 20C limit → overheating, fire risk
Knocks or punctures: can lead to chemical reactions violent and ignition
Extreme temperatures: 60°C → risk of explosion; <0°C → reduced performance and risk when charging
Unattended charging: fires may occur; charging under supervision and in a fireproof bag is recommended
Unsafe storage: completely discharged or connected to the replica can lead to damage; ideally ~3.8V/cell, in a cool place and away from fire
Safety recommendations
Use dedicated Li-Po chargers, with balancing
Disconnect the battery from the replica immediately after use
Check and maintain the appropriate charge level for storage (~3.8V/cell)
Store the battery in a cool place, away from short circuits and fire. Ideally, in a fireproof bag
Do not use or charge damaged, swollen or deformed batteries
Technical | |
Amperage (mAh) | 2000 |
Voltage (V) | 7.4 |