LI-PO - BATTERY 11.1V - 2000 MAH - 25C - T-PLUG

Technical Specifications

Nominal Voltage: 11.1V (3 cells in series – 3S)

Capacity: 2000mAh

Continuous Discharge Rate: 25C

Connector: T-Plug (Deans)

Estimated Dimensions: ~80 × 34 × 28.5 mm

Estimated Weight: ~142 g

Associated Hazards and Risks

Deep discharge: below 3.0V per cell can irreversibly damage the battery.

Overcharge: above 4.2V per cell can lead to swelling, fire or explosion.

Use at currents above 25C: risks overheating and rapid wear of the battery.

Impacts, deformations or punctures: can compromise the integrity of the battery and cause malfunctions or hazards.

Extreme temperatures: affect the performance and safety of the battery.

Unattended charging: can cause fires or other accidents; it is recommended to supervise charging, using safety accessories (fireproof bag, non-flammable support).

Improper storage: keeping at maximum voltage, connected to the replica when not in use, or completely discharged, all of which significantly shorten the battery life and can lead to defects.

Safety recommendations

Use a Li-Po charger with balancing to ensure proper charging of each cell.

Disconnect the battery from the replica immediately after use to avoid parasitic consumption and unnecessary discharge.

Charge the battery on a non-flammable surface, ideally in a fireproof Li-Po bag, and monitor the charging process; do not leave the battery unattended.

Store the battery at approximately 3.8V per cell if you will not use it for several days or more, in a cool place away from heat sources.

Check the condition of the battery periodically: if you notice signs such as swelling, deformation, a strange smell or excessive heating, stop using it.